Designed for broadcasters, videographers and sound recordists  Compact, lightweight design is perfect for camera-mount use  Independent Line-cardioid and Figure-of-eight condenser elements  Switchable low-frequency roll-off  Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes  Includes a 24" (0.61 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)

AT835ST Specifications Elements   Polar Patterns   Condenser   Line-cardioid and Figure-of-eight Frequency Response Low Frequency Roll-off   40 - 20,000 Hz   80 Hz, 12 dB per octave Open Circuit Sensitivity  (Mid / Side / LR Stereo) Maximum Input Sound Level  (Mid / Side / LR Stereo)   -30 dB (31.6 mV) / -34 dB (19.9 mV) / -36 dB (15.8 mV) re 1V at 1 Pa   123 dB / 127 dB / 126 dB SPL,  1 kHz at 1% T.H.D. Signal to Noise Ratio  (Mid / Side / LR Stereo) Dynamic Range (Typical)  (Mid / Side / LR Stereo)   72 dB / 68 dB / 70 dB SPL, 1 kHz at 1 Pa   101 dB / 101 dB / 102 dB, 1 kHz at Max. SPL Impedance Phantom Power Requirements   200 ohms   11 - 52V, 4 mA typical at 48V, each channel Switches Dimensions   M-S, LR Stereo-Wide (LR-W), LR Stereo-Narrow (LR-N); Flat, roll-off   9.29" (236.0 mm) long, 0.83" (21.0 mm) diameter Output Connector Weight   Integral XLR5M-type   3.6 oz (103 g)

Accessories Furnished:  AT8405 stand clamp; AT8134 foam windscreen; protective case